Total 72 results found.Search Results
TCCMS V131V2S2 for JSC-1D, JSC-3D, JSC-5D controllers
TCCMS V131V2S2 는 JSC-1D, JSC-3D, JSC-5D 콘트롤러를 RS-232C 또는 RS-485 시리얼 통신을 이용하여 PC와 통신이 가능한 프로그램 입니다.
Dry Heat Sterilizer (건열멸균기)
Dry Heat Sterilizer is a common instrument to be used to drying, heating and sterilizing objects by heating air up to 160°C or 180°C with gravity or forced convection system during specified sterilizing exposure time range from 30 to 60 minutes of sterilization exposure time
Dry Block Heater (드라이블럭히터)
JSBL-Series Dry Block Heater provides precise and constant temperature control source in the laboratory by heating interchangeable modular aluminum block. Ideal for microbiology and clinical laboratories for incubation, enzyme assay, inactivation, boiling, wet washing, extraction, sample concentration and many other applications. The anodized modular aluminum blocks accommodate PCR tubes, eppendorf tubes, microcentrifuge tubes. Heating Block hold 1, 2, 4 interchangeable modular blocks to accommodate a variety of vessels.
Ultra-Low Temp. Cold Trap Bath (초저온 콜드트랩 배스)
In vacuum applications, JSCT-Series Cold Trap Bath provides freezing temperature -35°C or -85°C to condensates and removes vapor or moisture being evacuated in the vacuum line to protect the vacuum pump from corrosion. The Traps may also be used in other laboratory applications such as freeze drying and desiccation.
Multi-Room Incubator (8-챔버 프로그램 다실배양기 )
JSMI-08CP(L) Series Multi-Room Refrigerated Incubator provides 8 chambers in a compact unit share less footprint. Temperature of each chamber can be controlled independently which allow to process incubation at different temperature condition at the same time to save incubation time and cost. Useful for bacteria incubation or comparison test of samples such as food packaging at different temperature condition. Equipped with 5 Pattern internal memory, 80 segments and light control for photoperiodic day-night simulation program capability provides various incubation and test condition needs temperature vs time vs light programming.
Cold Lab Chamber (시약 냉장고)
Cold Lab Chamber provides the reliability and security essential for the protection of temperature sensitive samples to be stored in +4°C range. Ideal for the demanding requirements of daily laboratory applications such as storage of chemicals, reagents and samples. Complete with adjustable shelves for storage, digital control for temperature setting with low temperature cut-off.
Electric Muffle Furnace (Max. 1,000°C 전기로)
Ideal for experiments and process needs high temperature up to 1,000°C such as chemical analysis, annealing loss determination, materials testing and ashing processes.
Compact Orbital Shaker (소형 진탕기)
JSOS-300 Orbital Shaker is compact and practical shaker for agitating samples in a container (e.g. flasks, bottles, tubes) in ambient condition to aerating, mixing and extracting samples. Various application in chemistry, biomedical, pharmaceutical, cell culture, tissue culture, environmental and agriculture applications.
Heavy Duty Industrial Oven (산업용 건조기)
Durable and Rugged Large Capacity Industrial Oven for industrial production line such as drying printed circuit panel, glass panel and stability test of electronic parts and components. Horizontal air flow with adjustable damper system on each shelf level allow to maintain optimum air circulation throughout the chamber which provides excellent temperature uniformity and operational condition
Bio-Suction Pump (아스피레이터)
Model JSBS-5000 Bio-Suction is an economical, compact and portable solution for aspirating tissue culture samples, aqueous solutions, buffers, culture media residual suction. Two stage oil-free piston pump provides a high flow rate and powerful vacuum aspiration. 4000 cc autoclaveable glass suction bottle with over flow protection stopper protects liquid ingested into the pump system which may lead to the valve failing or a diaphragm rupturing. Pump automatically shut down when full and a hydrophobic PTFE inline filter further protects the pump from aerosol ingestion. Hands free foot pedal switch provides convenient On/ Off operation. Built-in silencer provides comfortable noise-free operation
Multi-Chamber Shaking Incubator (다실 진탕배양기)
JSSI-202 Series Shaking Incubator has two independent temperature controlled chambers with shaker for big volume tissue culture applications at different temperature and shaking speed.
Drug Stability Test Chamber (의약품 안정성 시험 ICH 챔버)
JSDS-Series Temperature and Humidity Drug Stability Chamber designed for Drug Stability Test for pharmaceutical industry meets the requirement of ICH Guideline Q1A (Stability Test)
Shaking Water Bath (진탕항온수조)
JSSB-Series Water Bath controls precise temperature and integral linear shaking system with universal spring wire rack which will accommodates almost any size and combination of vessels. Ideal for chemistry, chemical engineering, cell culture, biotechnology, extraction and laboratory applications demanding constant temperature and mixing at the same time.
Vortex Mixer
볼텍스믹서는 다양한 형태의 소형 바이알, 마이크로 튜브, 코니칼 튜브 등에 담겨 있는 용액 샘플을 교반 하여 시료를 효과적으로 혼합하는데 사용합니다.
Analog Homogenizer
JSHR-270A Analog Tissue Homogenizer can rapidly homogenize, disperse and emulsify samples in 1 ml ~ 2,500 ml of liquid depending on the dispersing tool. During operation suspended material is drawn into the core of the dispersing tool by a rotor turning speed up to 27,000 rpm. The material repeatedly cycle through narrow slits of rotor and stator where it is rapidly sheared and disintegrated by high shear. Homogenizer can be used for disruption of tissue samples in biotechnology (plant or animal tissues such as muscle, liver, ligament), sample preparation in medicine, enzymatic treatment in the food industry as well as various application in pharmaceutical, cosmetic, paint, petro chemical, and other industrial applications.
Analog Overhead Stirrer
JSMS-xxxA Analog Mechanical Overhead Stirrer designed to homogenization, emulsification and dispersion and mixing of fluids at high speed. Stepless analog RPM control and equipped with heat protection safety cut-off system. Gearless torque conversion mechanism ensure less heat generation and anti-trembling shaft guarantee vibration and noise free operation.
Microcentrifuge
JSCF-M8 마이크로 원심분리기는 6,200 rpm / RCF 1,800 x g 의 spin-down 용도로 사용되며 로터를 공구 없이 간단하게 교체할 수 있도록 설계 되었으며 0.2 ml 와 0.5 ml 튜브용 어댑터를 제공 합니다.
PC Control Software for JSC-300 Temperature and Humidity Controller
JSC-300 항온항습 콘트롤러와 통신옵션을 탑재한 JSCH-xxxCP(L) 과 JSTH-xxxCP(L) 시리즈 항온항습기용 PC Software 입니다.
CE JSOF-150 Forced Convection Oven
CE (Communate Europeeene) 유럽안전규격 인증서
Autoclave (오토클레이브 / 고압스팀멸균기)
JSAT-Series Autoclave, Steam Sterilizer is an innovative replacement of conventional laboratory autoclave by providing reliable performance, up-to-dated design and safety door inter-lock system integrated with temperature and pressure for perfect user safety.
Large Capacity Circulation Bath (대형순환수조)
Heated circulating open bath system controls temperature range from ambient +5°C to 99°C, with internal and external circulation pump. Internal circulation allows precise thermal uniformity within ±0.2°C comparing to the conventional heated bath without circulation pump. External circulation pump enables to circulates heated water (liquid) to external equipments such applications as warming of reagents and culture media, thawing or tempering samples or controlling the temperature of laboratory equipments. External circulation pump capacity 13 liters/min. in flow rate and 0.5 bar in pressure.
환경챔버 항온항습기 +10°C ~ +80°C
JSTH-xxxCP Series Climatic Chamber is practical and economic choice for stability, reliability and acceleration aging test of various parts, components and final products in ambient range of temperature from +10°C to +80°C and humidity from 60 ~ 90% RH.
Tabletop Ultra-Low Temp. Cold Trap Bath (탁상형 초저온 콜드트랩 배스)
In vacuum applications, JSTC-Series Tabletop Cold Trap Bath provides freezing temperature -55°C or -85°C to condensates and removes vapor or moisture being evacuated in the vacuum line to protect the vacuum pump from corrosion. The Traps may also be used in other laboratory applications such as reactor, vacuum evaporator or vacuum centrifuge.
Tissue Culture Chamber (조직배양챔버)
JSCC-Series Plant Tissue Culture Chamber controls temperature and light for photoperiodic day-night simulation to provide controlled climatic condition for crop plants or photosynthetic organisms. Culture conditions such as temperature and light ON/OFF are programmable in 5 pattern memory, up to 80 segments for each pattern, light ON/OFF, temperature range from +0°C to 70°C
Multi-Room Incubator (5-챔버 다실배양기)
JSMI-05CL Muti-Room Incubator has 5 incubation chambers in a unit to shares less footprint. Temperature of each chamber can be controlled independently which allows to process five different conditions of incubation at the same time to save time and cost. Useful to general incubation or comparison test of samples such as food package aging test.
Electric Muffle Furnace (Max. 1,100°C 전기로)
Ideal for experiments and process needs high temperature up to 1,100°C such as chemical analysis, annealing loss determination, materials testing and ashing processes.
Tabletop Orbital Shaker (탁상형 진탕기)
JSOS-500 Orbital Shaker is heavy duty and large capacity shaker for agitating samples in a container (e.g. flasks, bottles, tubes) in ambient condition to aerating, mixing and extracting samples. Various application in chemistry, biomedical, pharmaceutical, cell culture, tissue culture, environmental and agriculture applications.
Dual Chamber Industrial Oven (2-챔버 산업용 건조기)
Dual Chamber Industrial Drying Oven is ideal for a laboratory and industrial application needs a large number of sample treatment such as sample drying, heat treatment or thermal testing. Independent temperature controller for each chamber to set and run at different temperature according to requirement. Nevertheless it's large volume, dual heating system on upper and lower compartment with two separate heating elements and blowers provide better air circulation throughout the chamber to achieve excellent temperature uniformity and faster heat up time.
Four Stack Shaking Incubator (4단 진탕배양기)
JSSI-4CM Series Four Stack Shaking Incubator provides multiple shaking platforms in a temperature controlled chamber for big volume tissue culture applications.
Extraction COD Bath (COD 추출항온수조)
JSEB-Series Extraction COD Digestion Bath is the most popular thermo reactor for determination Chemical Oxygen Demand in various substances. Chemical Oxygen Demand (COD) is a measure of the capacity of water to consume oxygen during the decomposition of organic matter and the oxidation of inorganic chemicals. Supplied with size adjustable concentric ring covers and frame set to hold glassware. Temperature range from ambient +5°C to 99.9°C
Digital Homogenizer
JSHR-270D Digital Tissue Homogenizer can rapidly homogenize, disperse and emulsify samples in 1 ml ~ 2,500 ml of liquid depending on the dispersing tool. During operation suspended material is drawn into the core of the dispersing tool by a rotor turning speed up to 27,000 rpm. The material repeatedly cycle through narrow slits of rotor and stator where it is rapidly sheared and disintegrated by high shear. Homogenizer can be used for disruption of tissue samples in biotechnology (plant or animal tissues such as muscle, liver, ligament), sample preparation in medicine, enzymatic treatment in the food industry as well as various application in pharmaceutical, cosmetic, paint, petro chemical, and other industrial applications.
Digital Overhead Stirrer
JSMS-xxxD Digital Overhead Stirrer designed to homogenization, emulsification and dispersion and mixing of fluids at high speed. This compact and rugged Overhead Stirrer is user-friendly designed with convenient Jog-Dial and High Fidelity LCD Display. Advanced Fuzzy Control System maintaining accurate and consistent RPM and equipped with heat protection safety cut-off system. Gearless torque conversion mechanism ensure less heat generation and anti-trembling shaft guarantee vibration and noise free operation.
Dry Bath Block Heater
JSDB-01T 드라이배스는 알미늄 블록의 온도를 정밀하게 제어하여 시료를 전처리 합니다. 알미늄 블록을 교체하여 0.2 ml PCR 튜브부터 Φ18 mm 시험관 까지 사용할 수 있습니다. 화학, 생명공학, 제약, 농학, 환경 분야의 시료 전처리에 다양하게 사용할 수 있습니다.
PC Control Software for JSC-950 Temperature and Humidity Controller
JSC-950 항온항습 콘트롤러와 통신옵션을 탑재한 JSRH-xxxCP(L) 시리즈 항온항습기용 PC Software 입니다.
Immersion Circulation Bath (가열순환수조)
Heated circulating open bath system controls temperature range from ambient +5°C to 99°C with internal and external circulation pump. Internal circulation allows precise thermal uniformity within ±0.1°C comparing to the conventional heated bath without circulation pump. External circulation pump enables to circulates heated water (liquid) to external equipments such applications as warming of reagents and culture media, thawing or tempering samples, biological incubation, cell culture, enzyme assays, or controlling the temperature of laboratory equipment such as chromatography columns, viscometers, and densitometers. External circulation pump capacity 8 liters/min. in flow rate and 0.3 bar in pressure.
환경챔버 항온항습기 -20°C ~ +120°C
JSTH-xxxCPL Series Climatic Chamber is practical and economic choice for stability, reliability and acceleration aging test of various parts, components and final products in ambient range of temperature from -20°C to +120C and humidity from 60 ~ 90% RH.
Plant Growth Chamber (JSPC-시리즈 3면조명 식물생장상)
JSPC-Series 3-Side Illumination Plant Growth Chamber provides reliable controlled climatic condition of temperature, humidity, lighting and CO2 concentration. Ideal to growing plant, plant tissue culture or any other laboratory experiments needs controlled climatic simulation. Various choice of capacity from 200 L ~ 864 L for tissue culture and plants growing. Light bank on the 3-side with fluorescent lamps provide light intensity up to 30,000 LUX.
Programmable Multi-Room Incubator (4-챔버 프로그램 다실배양기)
JSMI-04CP(L) Series Multi-Room Refrigerated Incubator provides 4 chambers in a compact unit share less footprint. Temperature of each chamber can be controlled independently which allow to process incubation at different temperature condition at the same time to save incubation time and cost. Useful for bacteria incubation or comparison test of samples such as food packaging at different temperature condition. Equipped with 5 Pattern internal memory, 80 segments and light control for photoperiodic day-night simulation program capability provides various incubation and test condition needs temperature vs time vs light programming.
Electric Muffle Furnace (Max. 1,200°C 전기로)
Ideal for experiments and process needs high temperature up to 1,200°C such as chemical analysis, annealing loss determination, materials testing and ashing processes.
HEPA Filter Clean Air Oven (클린에어 오븐)
Clean Air Oven is mechanical convection oven equipped with HEPA Filter Class H14 in laminar air path to remove particles up to 99.995% to keep oven chamber as clean room condition. Designed for applications drying or curing dust sensitive materials such as electronic components or medical parts, semi-conductor chip cleaning, display panel and wafer baking which needs particle free environment during heat treatment.
Two Stack Shaking Incubator (2단 진탕배양기)
JSSI-2CM Series Two Stack Shaking Incubator provides multiple shaking platforms in a temperature controlled chamber for big volume tissue culture applications.
Digital Oil Bath (오일 배스)
JSOB-Series Digital Oil Bath is suitable for high temperature applications using oil as a thermal media up to 250°C such as heat transfer, dipping and melting experiment
Orbital Shaker (회전진탕기)
JSOS-350Q 회전진탕기는 플라스크, 바틀, 시험관 등에 담겨진 시료를 실온의 조건에서 혼합 또는 추출하기 위하여 사용됩니다. 화학, 생명공학, 제약, 농학, 환경 분야의 시료 전처리에 다양하게 사용할 수 있습니다.
Vertical Laminar Flow Cabinet (클린벤치)
JSCB-SL 시리즈 Vertical Laminar Flow Safety Cabinet은 작업대 내부에 HEPA 필터로 여과된 공기를 지속적으로 공급하여 미생물 또는 미세한 먼지 등의 오염물질로부터 시료를 보호하도록 설계 되었습니다. 케비넷은 생물안전 1등급의 일반적인 미생물 실험과 무균, 무진 실험을 할 수 있습니다.
PC Control Software for JSC-2500 Temperature and Humidity Controller
JSC-2500 항온항습 콘트롤러와 통신옵션을 탑재한 JSRH-xxxCP(L) 시리즈 항온항습기용 PC Software 입니다.
-20°C Refrigerated Circulation Bath (-20°C 저온순환수조)
Heated/Refrigerated circulating open bath system capable of reaching temperature as low as -20°C and heating up to 120°C for a wide variety of laboratory heating and cooling applications. Internal circulation of thermal fluid within the bath allows precise uniformity within ±0.1°C. Circulation pump enables to circulates heated or refrigerated thermal fluid to external equipments such applications as reactor, condenser, rotary evaporator or controlling the temperature of laboratory equipment such as chromatography columns, viscometers, and densitometers. External circulation pump capacity 10 liters/min. in flow rate and 0.5 bar in pressure.
Plant Growth Chamber (JSGC-시리즈 식물생장상)
JSGC-Series Top Illumination Plant Growth Chamber provides reliable controlled climatic condition of temperature, humidity, lighting and CO2 concentration Ideal to growing plant, plant tissue culture or any other laboratory experiments needs controller climatic simulation. Various choice of capacity from 432L ~ 1512 L suitable to growing larger plants up to 1.2 m. Light bank on the top with HQI and fluorescent lamps provide light intensity up to 40,000 LUX.
350°C Hi-Temp Oven (고온 건조기)
High-Temp. Forced Convection Ovens provides higher temperature up to 350°C than conventional ovens for special application for material research or testing laboratory. Motorized fan to force air circulation across heating elements and circulates into the chamber. The fan allows more consistent distribution of air and optional inert gas (Nitrogen Gas) purge system allows control oxidation of samples at high temperature treatment.
Floor Standing Shaking Incubator (대형 진탕배양기)
JSSI-300 Series Shaking Incubator is ideal for any shaking application requiring controlled temperature and speed for microbiology, cell biology, cell culture, tissue culture, biochemistry, molecular biology, environmental engineering, soil testing field temperature range from + 10°C to +70°C and shaking speed from 20 ~ 350 rpm.
탁상형환경챔버 항온항습기 +10°C ~ +80°C
JSCH-Series Table Top Climatic Chamber is compact, practical and economic choice for stability, reliability and acceleration aging test of various parts, components and final products in ambient range of temperature from +10°C to +80°C and humidity from 60 ~ 90% RH.
