Dry Block Heater

JSBL-Series Dry Block Heater provides precise and constant temperature control source in the laboratory by heating interchangeable modular aluminum block. Ideal for microbiology and clinical laboratories for incubation, enzyme assay, inactivation, boiling, wet washing, extraction, sample concentration and many other applications. The anodized modular aluminum blocks accommodate PCR tubes, eppendorf tubes, microcentrifuge tubes. Heating Block hold 1, 2, 4 interchangeable modular blocks to accommodate a variety of vessels.

Ultra Low Temp. Cold Trap Bath

In vacuum applications, JSCT-Series Cold Trap Bath provides freezing temperature -35°C or -85°C to condensates and removes vapor or moisture being evacuated in the vacuum line to protect the vacuum pump from corrosion. The Traps may also be used in other laboratory applications such as freeze drying and desiccation.

Shaking Water Bath

JSSB-Series Water Bath controls precise temperature and integral linear shaking system with universal spring wire rack which will accommodates almost any size and combination of vessels. Ideal for chemistry, chemical engineering, cell culture, biotechnology, extraction and laboratory applications demanding constant temperature and mixing at the same time.

CE JSWB-22T Digital Water Bath

Large Capacity Circulation Bath

Heated circulating open bath system controls temperature range from ambient +5°C to 99°C, with internal and external circulation pump. Internal circulation allows precise thermal uniformity within ±0.2°C comparing to the conventional heated bath without circulation pump. External circulation pump enables to circulates heated water (liquid) to external equipments such applications as warming of reagents and culture media, thawing or tempering samples or controlling the temperature of laboratory equipments. External circulation pump capacity 13 liters/min. in flow rate and 0.5 bar in pressure.

Extraction COD Bath

JSEB-Series Extraction COD Digestion Bath is the most popular thermo reactor for determination Chemical Oxygen Demand in various substances. Chemical Oxygen Demand (COD) is a measure of the capacity of water to consume oxygen during the decomposition of organic matter and the oxidation of inorganic chemicals. Supplied with size adjustable concentric ring covers and frame set to hold glassware. Temperature range from ambient +5°C to 99.9°C

Ultra Low Temp. Tabletop Cold Trap Bath

In vacuum applications, JSTC-Series Tabletop Cold Trap Bath provides freezing temperature -55°C or -85°C to condensates and removes vapor or moisture being evacuated in the vacuum line to protect the vacuum pump from corrosion. The Traps may also be used in other laboratory applications such as reactor, vacuum evaporator or vacuum centrifuge.

Dry Bath Block Heater

JSDB-Series Dry Bath Block Heater provides precise and constant temperature control source in the laboratory by heating interchangeable modular aluminum block. Ideal for microbiology and clinical laboratories for incubation, enzyme assay, inactivation, boiling, wet washing, extraction, sample concentration and many other applications. The anodized modular aluminum blocks accommodate PCR tubes, eppendorf tubes, microcentrifuge tubes. Interchangeable modular blocks to accommodate a variety of tubes.

Immersion Circulation Bath

Heated circulating open bath system controls temperature range from ambient +5°C to 99°C with internal and external circulation pump. Internal circulation allows precise thermal uniformity within ±0.1°C comparing to the conventional heated bath without circulation pump. External circulation pump enables to circulates heated water (liquid) to external equipments such applications as warming of reagents and culture media, thawing or tempering samples, biological incubation, cell culture, enzyme assays, or controlling the temperature of laboratory equipment such as chromatography columns, viscometers, and densitometers. External circulation pump capacity 8 liters/min. in flow rate and 0.3 bar in pressure.

Digital Oil Bath

JSOB-Series Digital Oil Bath is suitable for high temperature applications using oil as a thermal media up to 250°C such as heat transfer, dipping and melting experiment

-20°C Refrigerated Circulation Bath

Heated/Refrigerated circulating open bath system capable of reaching temperature as low as -20°C and heating up to 120°C for a wide variety of laboratory heating and cooling applications. Internal circulation of thermal fluid within the bath allows precise uniformity within ±0.1°C. Circulation pump enables to circulates heated or refrigerated thermal fluid to external equipments such applications as reactor, condenser, rotary evaporator or controlling the temperature of laboratory equipment such as chromatography columns, viscometers, and densitometers. External circulation pump capacity 10 liters/min. in flow rate and 0.5 bar in pressure.

-40°C Refrigerated Circulation Bath

Heated/Refrigerated circulating open bath system capable of reaching temperature as low as -40°C and heating up to 120°C for a wide variety of laboratory heating and cooling applications. Internal circulation of thermal fluid within the bath allows precise uniformity within ±0.1°C. Circulation pump enables to circulates heated or refrigerated thermal fluid to external equipments such applications as reactor, condenser, rotary evaporator or controlling the temperature of laboratory equipment such as chromatography columns, viscometers, and densitometers. External circulation pump capacity 10 liters/min. in flow rate and 0.5 bar in pressure.

Vacuum Oven

Vacuum Drying Oven is suitable for drying out liquids or solvents contained in a samples or materials in vacuum environment to achieve low heat of vaporization or sublimation point. Ideal for Vacuum Distillation, Vacuum Sublimation or Vacuum Drying application of material science or electronic parts and assemblies. Also suitable for drying out fine powders in vacuum environment without air convection to prevent diffusion of such samples. Drying, curing, de-gassing, aging, removing moisture or solvent from fine powder or solid material, accelerating drying time, drying temperature sensitive material, drying in anaerobic condition, remove solvent from DNA, RNA or protein, drying unidentified material characteristic.

Indirect Heated Digital Water Bath

JSWB-TL Series Indirect Heated Digital Water Bath provides constant temperature environment with heated water. Ceramic Heating Element located beneath the surface of the bath makes it easier for cleaning and maintaining. It also has more usable height space. In addition, its structure provides better temperature uniformity by heating the entire bath floor. Suitable for biotechnology, chemistry, medical, environmental and general laboratory applications of temperature range from ambient +5 oC to 70 oC

Heated Digital Water Bath

JSWB-T Series Digital Water Bath to provides constant temperature environment with heated water. Suitable for biotechnology, chemistry, medical, environmental and general laboratory applications of temperature range from ambient +5 oC to 99 oC